View APT6010JLL_1066726.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

APT6010JLL
600V 47A 0.100
S G D S
POWER MOS 7
(R)
R
MOSFET
Power MOS 7 is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching (R) losses are addressed with Power MOS 7 by significantly lowering RDS(ON) (R) and Qg. Power MOS 7 combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with MIcrosemi's patented metal gate structure. * Lower Input Capacitance * Lower Miller Capacitance * Lower Gate Charge, Qg
MAXIMUM RATINGS
Symbol VDSS ID IDM VGS VGSM PD TJ,TSTG TL IAR EAR EAS Parameter Drain-Source Voltage Continuous Drain Current @ TC = 25C Pulsed Drain Current
1
SO
2 T-
27
"UL Recongnized"
file # 145592
ISOTOP fi
* Increased Power Dissipation * Easier To Drive * Popular SOT-227 Package
D G S
All Ratings: TC = 25C unless otherwise specified.
APT6010JLL UNIT Volts Amps
600 47 188 30 40 520 4.16 -55 to 150 300 47 50
4
Gate-Source Voltage Continuous Gate-Source Voltage Transient Total Power Dissipation @ TC = 25C Linear Derating Factor Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec. Avalanche Current
1
Volts Watts W/C C Amps mJ
(Repetitive and Non-Repetitive)
1
Repetitive Avalanche Energy
Single Pulse Avalanche Energy
3000
STATIC ELECTRICAL CHARACTERISTICS
Symbol BVDSS RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions Drain-Source Breakdown Voltage (VGS = 0V, ID = 250A) Drain-Source On-State Resistance
2
MIN
TYP
MAX
UNIT Volts
600 0.100 100 500 100 3 5
(VGS = 10V, ID = 23.5A)
Ohms A nA Volts
6-2006 050-7052 Rev E
Zero Gate Voltage Drain Current (VDS = 600V, VGS = 0V) Zero Gate Voltage Drain Current (VDS = 480V, VGS = 0V, TC = 125C) Gate-Source Leakage Current (VGS = 30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS, ID = 2.5mA)
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
Microsemi Website - http://www.microsemi.com
DYNAMIC CHARACTERISTICS
Symbol Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf Eon Eoff Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge
3
APT6010JLL
Test Conditions
VGS = 0V VDS = 25V f = 1 MHz VGS = 10V VDD = 300V ID = 47A @ 25C RESISTIVE SWITCHING VGS = 15V VDD = 300V ID = 47A @ 25C RG = 0.6 6 INDUCTIVE SWITCHING @ 25C VDD = 400V, VGS = 15V ID = 47A, RG = 5 6 INDUCTIVE SWITCHING @ 125C VDD = 400V VGS = 15V ID = 47A, RG = 5
MIN
TYP
MAX
UNIT
6710 1250 90 150 30 75 12 17 34 10 770 845 1000 1060
MIN TYP MAX UNIT Amps Volts ns C nC pF
Gate-Source Charge Gate-Drain ("Miller") Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Switching Energy Turn-off Switching Energy
ns
J
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
Symbol IS ISM VSD t rr Q rr
dv/ dt
Characteristic / Test Conditions Continuous Source Current (Body Diode) Pulsed Source Current Diode Forward Voltage
1 2
47 188 1.3 790 17.9 8
MIN TYP MAX
(Body Diode) (VGS = 0V, IS = -47A)
Reverse Recovery Time (IS = -47A, dl S /dt = 100A/s) Reverse Recovery Charge (IS = -47A, dl S/dt = 100A/s) Peak Diode Recovery Characteristic Junction to Case RMS Volatage (50-60hHZ Sinusoidal Waveform from Terminals to Mounting Base for 1 Min.)
dv/ dt 5
V/ns
THERMAL CHARACTERISTICS
Symbol RJC VIsolation UNIT C/W Volts
0.24 2500
1 Repetitive Rating: Pulse width limited by maximum junction temperature 2 Pulse Test: Pulse width < 380 s, Duty Cycle < 2% 3 See MIL-STD-750 Method 3471
4 Starting Tj = +25C, L = 2.72mH, RG = 25, Peak IL = 47A 5 dv/dt numbers reflect the limitations of the test circuit rather than the device itself. IS -ID47A di/dt 700A/s VR 600V TJ 150C 6 Eon includes diode reverse recovery. See figures 18, 20.
Microsemi reserves the right to change, without notice, the specifications and inforation contained herein.
0.25
, THERMAL IMPEDANCE (C/W)
D = 0.9 0.20 0.7 0.15 0.5 0.10 0.3 0.05 0.1 0 0.05 10-5 10-4 SINGLE PULSE Note:
PDM t1 t2 Duty Factor D = t1/t2 Peak TJ = PDM x ZJC + TC
6-2006
050-7052 Rev E
Z
JC
10-3 10-2 10-1 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION
1.0
Typical Performance Curves
ID, DRAIN CURRENT (AMPERES)
140 120 100 80 60
APT6010JLL
VGS=15 &10V 8V 7.5V
TJ ( C)
0.0528 Dissipated Power (Watts) 0.0203 0.173 0.490 0.0651
TC ( C)
0.123
7V
ZEXT
6.5V 40 20 0 6V 5.5V
ZEXT are the external thermal impedances: Case to sink, sink to ambient, etc. Set to zero when modeling only the case to junction.
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
FIGURE 2, TRANSIENT THERMAL IMPEDANCE MODEL 160
ID, DRAIN CURRENT (AMPERES)
0 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 3, LOW VOLTAGE OUTPUT CHARACTERISTICS 1.40
V
GS
140 120 100 80 60 40 20 0
VDS> ID (ON) x RDS (ON)MAX. 250SEC. PULSE TEST @ <0.5 % DUTY CYCLE
NORMALIZED TO = 10V @ 23.5A
1.30 1.20 1.10 1.00 0.90 0.80
VGS=10V VGS=20V
TJ = +125C TJ = +25C
TJ = -55C
0 1 2 3 4 5 6 7 8 9 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) FIGURE 4, TRANSFER CHARACTERISTICS
0
50
BVDSS, DRAIN-TO-SOURCE BREAKDOWN VOLTAGE (NORMALIZED) ID, DRAIN CURRENT (AMPERES)
1.15
20 40 60 80 100 ID, DRAIN CURRENT (AMPERES) FIGURE 5, RDS(ON) vs DRAIN CURRENT
40
1.10
30
1.05
20
1.00
10
0.95
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE (NORMALIZED)
50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 6, MAXIMUM DRAIN CURRENT vs CASE TEMPERATURE 2.5
I
D
0 25
0.90 -50
-25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 7, BREAKDOWN VOLTAGE vs TEMPERATURE 1.2 1.1 1.0 0.9 0.8 0.7 0.6 -50
= 23.5A = 10V
V
2.0
1.5
1.0
VGS(TH), THRESHOLD VOLTAGE (NORMALIZED)
GS
0.5
0.0 -50
-25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) FIGURE 8, ON-RESISTANCE vs. TEMPERATURE
-25 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (C) FIGURE 9, THRESHOLD VOLTAGE vs TEMPERATURE
050-7052 Rev E
6-2006
190
ID, DRAIN CURRENT (AMPERES)
100
OPERATION HERE LIMITED BY RDS (ON)
20,000 10,000 Ciss
APT6010JLL
100S
C, CAPACITANCE (pF)
1,000
Coss
10 1mS
100
Crss
I
D
= 47A
VDS=120V 12 VDS=300V
IDR, REVERSE DRAIN CURRENT (AMPERES)
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
1 10 100 600 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 10, MAXIMUM SAFE OPERATING AREA 16
1
TC =+25C TJ =+150C SINGLE PULSE
10mS 10
0 10 20 30 40 50 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 11, CAPACITANCE vs DRAIN-TO-SOURCE VOLTAGE 200 100
TJ =+150C TJ =+25C 10
VDS=480V 8
4
50 100 150 200 250 Qg, TOTAL GATE CHARGE (nC) FIGURE 12, GATE CHARGES vs GATE-TO-SOURCE VOLTAGE 120 100 td(off)
0
0
1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS) FIGURE 13, SOURCE-DRAIN DIODE FORWARD VOLTAGE 140
V
DD G
= 400V
120 100
tr and tf (ns)
R
= 5
T = 125C
J
L = 100H
td(on) and td(off) (ns)
80 60 40 20 0
V
DD G
= 400V
R
= 5
T = 125C
J
80 tf 60 tr 40
L = 100H
td(on) 20 0
10
50 60 70 80 90 ID (A) FIGURE 14, DELAY TIMES vs CURRENT
V
DD G
20
30
40
50 60 70 80 90 ID (A) FIGURE 15, RISE AND FALL TIMES vs CURRENT 4000
V I
DD
10
20
30
40
2500
= 400V
= 400V
R
= 5
D J
= 47A
L = 100H E ON includes diode reverse recovery
SWITCHING ENERGY (J)
2000
Eon and Eoff (J)
T = 125C
J
T = 125C
Eoff
3000
L = 100H E ON includes diode reverse recovery
Eoff
1500
2000 Eon 1000
1000 Eon 500
050-7052 Rev E
6-2006
0
50 60 70 80 90 ID (A) FIGURE 16, SWITCHING ENERGY vs CURRENT
10
20
30
40
10 15 20 25 30 35 40 45 50 RG, GATE RESISTANCE (Ohms) FIGURE 17, SWITCHING ENERGY VS. GATE RESISTANCE
0
0
5
APT6010JLL
90% 10% Gate Voltage TJ125C Gate Voltage T 125C J
td(off) td(on) tr
90% Drain Current 90% Drain Voltage
tf
5% Switching Energy 10% 5% Drain Voltage Switching Energy
10% 0
Drain Current
Figure 18, Turn-on Switching Waveforms and Definitions
Figure 19, Turn-off Switching Waveforms and Definitions
APT30DF60
V DD
ID
V DS
G D.U.T.
Figure 20, Inductive Switching Test Circuit
SOT-227 (ISOTOP(R)) Package Outline
31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 11.8 (.463) 12.2 (.480) 8.9 (.350) 9.6 (.378) Hex Nut M4 (4 places)
r = 4.0 (.157) (2 places)
4.0 (.157) 4.2 (.165) (2 places)
25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504)
14.9 (.587) 15.1 (.594) 30.1 (1.185) 30.3 (1.193) 38.0 (1.496) 38.2 (1.504)
* Source
Drain
* Source terminals are shorted internally. Current handling capability is equal for either Source terminal.
* Source Dimensions in Millimeters and (Inches)
Gate
ISOTOP(R) is a registered trademark of ST Microelectronics NV.Microsemi's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.
050-7052 Rev E
6-2006
3.3 (.129) 3.6 (.143)
1.95 (.077) 2.14 (.084)

▲Up To Search▲

Price & Availability of APT6010JLL

	To Download APT6010JLL Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .